Page 2 of 4

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Thu Jul 12, 2012 9:31 am
by billion_fan
simon194 wrote:A replacement 8200N turned up today although I won't get a chance to start testing until the weekend. I flashed the .dy2 firmware and it still has the same ClientID issue as the previous version.
Please drop admin a PM and let him know the replacement unit has arrived.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Tue Jul 17, 2012 11:33 am
by simon194
admin wrote: We assume Sky uses VLAN ID 101 also but we have no way of confirming it unless other users find out for your.
The VLAN ID is confirmed to be 101.

I have an unlocked Huawei modem to replace the ECI one so I could check it.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Fri Jul 20, 2012 12:25 am
by simonmpoulton
Just received an 8200n today purely for replacing the two box solution on my sky fttc connection and have been sorely disappointed. Never mind the client ID issue which you say was fixed with the latest beta firmware but it clearly wasn't and you have to manually edit a config file to get it in. There is a much more serious issue - it does not even sync with the cabinet and I see I am not the only one with this issue and that Billion have done nothing to fix this problem.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Fri Jul 20, 2012 1:21 pm
by admin
simonmpoulton wrote:Just received an 8200n today purely for replacing the two box solution on my sky fttc connection and have been sorely disappointed. Never mind the client ID issue which you say was fixed with the latest beta firmware but it clearly wasn't and you have to manually edit a config file to get it in. There is a much more serious issue - it does not even sync with the cabinet and I see I am not the only one with this issue and that Billion have done nothing to fix this problem.

Hi Simon,

Please understand the firmware we released are beta firmware and they are for testing only and not guarantee to work. Even with the 7800N firmware for Sky it did take a few version to get it right. We are already looking onto the problem and yes you are not the only one as we have another user with no sync issue and he is on the ECI DLSAM. What DSLAM are you on do you know? Anyway you have already submit a ticket to our esupport and we will update you as soon as we get an update from engineers

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Fri Jul 20, 2012 8:43 pm
by simonmpoulton
The issue with the beta firmware is a minor one. The biggest issue I have is with Billion releasing a product that is not ready for use in the UK given it doesn't sync up with all fibre cabinets.
Going by the pictures of street cabinets it looks like i'm connected to an ECI one although I was given a Huawei modem by OpenReach when it was installed.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Sun Jul 22, 2012 1:01 am
by simon194
simonmpoulton wrote:The issue with the beta firmware is a minor one. The biggest issue I have is with Billion releasing a product that is not ready for use in the UK given it doesn't sync up with all fibre cabinets.
Going by the pictures of street cabinets it looks like i'm connected to an ECI one although I was given a Huawei modem by OpenReach when it was installed.
The router apparently syncs OK with Huawei equipment which is by far the most common that's been rolled out to date although Openreach are now rolling out ECI kit because the DSLAM's are cheaper. There's obviously some slight difference between the way the two operate because the ECI modem I was supplied with syncs up in about 15 seconds but the Huawei I bought, so I could get my line stats and it also handles line noise better, can take up to 2 minutes to sync.

I only supplied the captures from my line on Tuesday so hopefully it will be sorted out soon (I'm the one admin mentioned BTW). In the mean time I'm using the router in EWAN mode because of the issue with the Sky supplied router where devices connected by wifi can't access devices that are wired.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Wed Aug 08, 2012 10:22 pm
by simonmpoulton
Billion have just sent me a new test firmware which syncs up with the cabinet and doesn't have the problem with the client ID field either so good job billion for sorting it out.
Only issue I have now is with the router syncing up 5mbps slower than the BT modem - it's a minor one I know but would be nice if Billion sorted that one too!

I've attached some notes for future users as to exactly what settings you need to put in to make it sync up and connect to SKY Fibre correctly.
Notes For Setup of Billion 8200N On Sky Fibre.doc

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Thu Aug 16, 2012 4:02 pm
by simon194
Now my lines been running on the 80/20 product for a few days, I'll be sorting out some new debug logs this weekend so hopefully it can be tweaked a bit.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Sun Aug 19, 2012 9:08 am
by simon194
Well, couldn't produce any debug logs because I had problems with the capture software (support has been informed).

Now I'm on the 80/20 product the sync speed of the 8200N is well down, around 9Mbps lower than the ECI modem that was originally installed and 17Mbps lower than the Huawei modem I currently use.

Re: BiPAC 8200N test firmware with DHCP option 61 for Sky FT

Posted: Mon Aug 20, 2012 7:44 pm
by cmndwedge
I have recently tried to get the 8200N working with Sky Fibre but also having the
"The value is invalid" error for the client ID and cannot find a way round it.

Currently using the 1.06a.dt6.dy2 firmware.