Billion UK Forum

Posted: **Mon Dec 06, 2021 3:37 pm**

Suddenly this afternoon no devices on the 2.4gHz channel were connected. When I look at the status and DHCP and ARP entries I see nothing on this channel.

I do see the following entries in the system log now being repeated

Dec 6 15:26:21 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:26 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:32 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:38 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:43 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:49 user info syslog: wl1 reinit occurred ..

Devices on the 5gHz channel and Ethernet are still working. Is this a hardware fault? I have power cycled the router several times, waiting a few minutes to power on each time

Posted: **Tue Dec 07, 2021 9:11 am**

Ksaro1 wrote: ↑Mon Dec 06, 2021 3:37 pm Suddenly this afternoon no devices on the 2.4gHz channel were connected. When I look at the status and DHCP and ARP entries I see nothing on this channel.

I do see the following entries in the system log now being repeated

Dec 6 15:26:21 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:26 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:32 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:38 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:43 user info syslog: wl1 reinit occurred ..
Dec 6 15:26:49 user info syslog: wl1 reinit occurred ..

Devices on the 5gHz channel and Ethernet are still working. Is this a hardware fault? I have power cycled the router several times, waiting a few minutes to power on each time

It might be a hardware fault, last thing to try as you have tried a power cycle, is to make a backup of the config and reset back to factory default settings, from default settings see if you can see the SSID and connect via the 2.4ghz band.

Billion UK Forum

2.4gHz channel stopped working on 8800AXL R2

2.4gHz channel stopped working on 8800AXL R2

Re: 2.4gHz channel stopped working on 8800AXL R2