8800nl R2 Ping Increased

[nfxcr3w]

Since i bought the revised version my ping use to be 5ms it's increased to 7ms my isp router said i was on fast path but the billion router shows im on interleaved on the downstream 16 upstream says 1. here's the stats from the 8800nl R2. Connection uptime is 8 Day(s) 16:17:07

Capture.JPG

[billion_fan]

Since i bought the revised version my ping use to be 5ms it's increased to 7ms my isp router said i was on fast path but the billion router shows im on interleaved on the downstream 16 upstream says 1. here's the stats from the 8800nl R2. Connection uptime is 8 Day(s) 16:17:07

Capture.JPG

It does seem you are interleaved, from looking at your interleaver depth, unfortunately you can't adjust this, as it is controlled by your ISP, best to leave the router connected to the internet, and hope the interleave depth drops with stability

[nfxcr3w]

Since i bought the revised version my ping use to be 5ms it's increased to 7ms my isp router said i was on fast path but the billion router shows im on interleaved on the downstream 16 upstream says 1. here's the stats from the 8800nl R2. Connection uptime is 8 Day(s) 16:17:07

Capture.JPG

It does seem you are interleaved, from looking at your interleaver depth, unfortunately you can't adjust this, as it is controlled by your ISP, best to leave the router connected to the internet, and hope the interleave depth drops with stability

Thanks for getting back in touch i noticed when i switch from isp modem it said i was on fast path on the downstream and upstream but Billion shows interleave on downstream only do you know why this is? is g.inp only applied to the upstream not the downstream on the billion router as this is what i think it's doing.

[billion_fan]

Since i bought the revised version my ping use to be 5ms it's increased to 7ms my isp router said i was on fast path but the billion router shows im on interleaved on the downstream 16 upstream says 1. here's the stats from the 8800nl R2. Connection uptime is 8 Day(s) 16:17:07

Capture.JPG

It does seem you are interleaved, from looking at your interleaver depth, unfortunately you can't adjust this, as it is controlled by your ISP, best to leave the router connected to the internet, and hope the interleave depth drops with stability

Thanks for getting back in touch i noticed when i switch from isp modem it said i was on fast path on the downstream and upstream but Billion shows interleave on downstream only do you know why this is? is g.inp only applied to the upstream not the downstream on the billion router as this is what i think it's doing.

Looking at your stats g.inp is applied to the downstream only, this is normal as BT has disabled g.inp on the upstream a while back, also what firmware version are you running??

[nfxcr3w]

It does seem you are interleaved, from looking at your interleaver depth, unfortunately you can't adjust this, as it is controlled by your ISP, best to leave the router connected to the internet, and hope the interleave depth drops with stability

Thanks for getting back in touch i noticed when i switch from isp modem it said i was on fast path on the downstream and upstream but Billion shows interleave on downstream only do you know why this is? is g.inp only applied to the upstream not the downstream on the billion router as this is what i think it's doing.

Looking at your stats g.inp is applied to the downstream only, this is normal as BT has disabled g.inp on the upstream a while back, also what firmware version are you running??

Firmware 2.52.d1

[billion_fan]

Thanks for getting back in touch i noticed when i switch from isp modem it said i was on fast path on the downstream and upstream but Billion shows interleave on downstream only do you know why this is? is g.inp only applied to the upstream not the downstream on the billion router as this is what i think it's doing.

Looking at your stats g.inp is applied to the downstream only, this is normal as BT has disabled g.inp on the upstream a while back, also what firmware version are you running??

Firmware 2.52.d1

You can try firmware 2.50a.d13, which has a different DMT code link below

2.50a.d13 - A2pvI042c.d26e
2.52.d1 - A2pvI042j1.d26m

http://www.billion.uk.com/esupport/inde ... on-250ad13

[nfxcr3w]

Looking at your stats g.inp is applied to the downstream only, this is normal as BT has disabled g.inp on the upstream a while back, also what firmware version are you running??

Firmware 2.52.d1

You can try firmware 2.50a.d13, which has a different DMT code link below

2.50a.d13 - A2pvI042c.d26e
2.52.d1 - A2pvI042j1.d26m

http://www.billion.uk.com/esupport/inde ... on-250ad13

Cheers i'll give this a go when i get time.

[nfxcr3w]

Looking at your stats g.inp is applied to the downstream only, this is normal as BT has disabled g.inp on the upstream a while back, also what firmware version are you running??

Firmware 2.52.d1

You can try firmware 2.50a.d13, which has a different DMT code link below

2.50a.d13 - A2pvI042c.d26e
2.52.d1 - A2pvI042j1.d26m

http://www.billion.uk.com/esupport/inde ... on-250ad13

So i put the 2.50a.d13 on and factory reset and it's still showing interleave 16 on the downstream and 1 on the upstream yet on my asus dsl-ac68u and the btsmarthub both show fastpath on the downstream and upstream of 1.

[billion_fan]

Firmware 2.52.d1

You can try firmware 2.50a.d13, which has a different DMT code link below

2.50a.d13 - A2pvI042c.d26e
2.52.d1 - A2pvI042j1.d26m

http://www.billion.uk.com/esupport/inde ... on-250ad13

So i put the 2.50a.d13 on and factory reset and it's still showing interleave 16 on the downstream and 1 on the upstream yet on my asus dsl-ac68u and the btsmarthub both show fastpath on the downstream and upstream of 1.

I'm sure what we can do, as there is no setting in the Billion to adjust your interleave depth

[nfxcr3w]

You can try firmware 2.50a.d13, which has a different DMT code link below

2.50a.d13 - A2pvI042c.d26e
2.52.d1 - A2pvI042j1.d26m

http://www.billion.uk.com/esupport/inde ... on-250ad13

So i put the 2.50a.d13 on and factory reset and it's still showing interleave 16 on the downstream and 1 on the upstream yet on my asus dsl-ac68u and the btsmarthub both show fastpath on the downstream and upstream of 1.

I'm sure what we can do, as there is no setting in the Billion to adjust your interleave depth

Sorry bit confused what do you mean by "I'm sure what we can do," Here is what the Asus dsl-ac68u is showing stats below. So i don't get why the asus is showing im on fastpath yet the 8800NL R2 is showing im on interleave.

Capture.JPG