I am trying to port forward to an internal web server. The external port should be 8090 and the internal port is 80.
I can change the external start and end ports to 8090, but it will only allow me to modify the internal start port because the box for end port is greyed out. Anyone got any ideas how to amend this?
* SOLVED * Cannot Amend Virtual Server End Port
-
irv075
- Posts: 2
- Joined: Wed Jul 31, 2013 12:45 pm
* SOLVED * Cannot Amend Virtual Server End Port
You do not have the required permissions to view the files attached to this post.
Last edited by irv075 on Thu Feb 27, 2014 11:11 am, edited 1 time in total.
-
billion_fan
- Posts: 5398
- Joined: Tue Jul 19, 2011 4:30 pm
Re: Cannot Amend Virtual Server End Port
Try firmware 2.32d, attached is my rule seems to work fineirv075 wrote:I am trying to port forward to an internal web server. The external port should be 8090 and the internal port is 80.
I can change the external start and end ports to 8090, but it will only allow me to modify the internal start port because the box for end port is greyed out. Anyone got any ideas how to amend this?
You do not have the required permissions to view the files attached to this post.
-
irv075
- Posts: 2
- Joined: Wed Jul 31, 2013 12:45 pm
Re: Cannot Amend Virtual Server End Port
I'm already on 2.32d, but have had this issue for a couple of firmwares now. However, your screenshot gave me a hint on the solution and I've got it working:
You have to make sure that you are using "Custom Service" first. If you try and select Web Server (HTTP) then change the ports it does not work
You have to make sure that you are using "Custom Service" first. If you try and select Web Server (HTTP) then change the ports it does not work