Bipac 8800AXLR2/8800NLR2 2.52.d12

[evansnp]

Done

[billion_fan]

Done

Received and reply sent

[evansnp]

FYI: Since my enforced re-boot, I'm getting IPV6 RA filling the logs again; somethings not right with this router.

[billion_fan]

FYI: Since my enforced re-boot, I'm getting IPV6 RA filling the logs again; somethings not right with this router.

I've updated our engineers on this issue also, (you enable the DHCPv6 server, disable it, no more RA logs, then when the device is rebooted the logs show again)

[Grimers]

Just updated to 2.52.d12 hoping it would also fix the "No Internet" issue that can sometimes occur randomly, but no the issue still occurs! Only a restart can fix it.

[billion_fan]

Just updated to 2.52.d12 hoping it would also fix the "No Internet" issue that can sometimes occur randomly, but no the issue still occurs! Only a restart can fix it.

We will need a full copy of your system log once the issue has occurred, so our engineers can investigate

[Grimers]

Ok, will post if it occurs again. Where can I find this log?

[billion_fan]

Ok, will post if it occurs again. Where can I find this log?

Status >>> Log >> System Log

[Grimers]

Having connection issues with Steam and Euro Truck Simulator 2 again this evening, definitely a problem with the router.

EDIT: Reboot fixed it once again! Here's a snippet from the system log:

Code: Select all

Nov 22 20:11:04 daemon warn radvd[3670]: received RA from fe80::6203:47ff:fe39:8492

[billion_fan]

Having connection issues with Steam and Euro Truck Simulator 2 again this evening, definitely a problem with the router.

EDIT: Reboot fixed it once again! Here's a snippet from the system log:

Code: Select all

Nov 22 20:11:04 daemon warn radvd[3670]: received RA from fe80::6203:47ff:fe39:8492

This is standard IPv6 messages from the router, it is not related.

Sounds like you have DSL/connectivity issues, I have attached a newer firmware with a different DMT code, lets see if it helps

Also change your system log settings to 'Debugging' found once logged into the router under 'Configuration >> System >> Configure Log' set the Log Level/Display Level to Debugging