8800nl with way too many error seconds.
-
colsey85
- Posts: 12
- Joined: Mon Apr 13, 2015 6:51 pm
Re: 8800nl with way too many error seconds.
Ok will do, I have another month before I need to send it back.
-
colsey85
- Posts: 12
- Joined: Mon Apr 13, 2015 6:51 pm
Re: 8800nl with way too many error seconds.
2 days 15 hours its been running and im up to 1330 es and 96 ses. Is that high? all I have to compare to is the cheap talktalk router which said I had 0 error seconds over a 48 hour period but im not sure how much I believe that
-
frogfoot
- Posts: 67
- Joined: Sat Jun 02, 2012 8:21 pm
Re: 8800nl with way too many error seconds.
I have the 8800axl and had FTTC enabled on 3 days and 5 hours ago, I have the following stats for comparison.
The router was connected via ADSL2+ for a day prior to FTTC being enabled, hence the difference between the Total count and the 'Since Link' count
Code: Select all
adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 25361 Kbps, Downstream rate = 88780 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79987 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 8.4 11.6
Attn(dB): 12.7 0.0
Pwr(dBm): 13.5 1.3
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 239 237
M: 1 1
T: 23 42
R: 0 16
S: 0.0955 0.3781
L: 20104 5374
D: 1 1
I: 240 127
N: 240 254
Counters
Bearer 0
OHF: 169425789 2975498
OHFErr: 355 762
RS: 0 898527
RSCorr: 0 4167
RSUnCorr: 0 0
Bearer 0
HEC: 2050 0
OCD: 69 0
LCD: 69 0
Total Cells: 152231142 0
Data Cells: 504670026 0
Drop Cells: 0
Bit Errors: 0 0
ES: 605 933
SES: 21 7
UAS: 3078 3057
AS: 280191
Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 1.65 3.98
OR: 116.09 64.22
AgR: 80103.09 20063.54
Bitswap: 17272/17272 1300/1301
Total time = 4 days 2 hours 50 min 10 sec
FEC: 0 4167
CRC: 6424 762
ES: 605 933
SES: 21 7
UAS: 3078 3057
LOS: 2 0
LOF: 16 0
LOM: 0 0
Latest 15 minutes time = 5 min 10 sec
FEC: 0 2
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 1
CRC: 0 2
ES: 0 2
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 2 hours 50 min 10 sec
FEC: 0 65
CRC: 1 27
ES: 1 24
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 0 818
CRC: 112 231
ES: 88 190
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
********************************************************
Since Link time = 3 days 5 hours 50 min 44 sec
FEC: 0 4167
CRC: 355 762
ES: 252 598
SES: 0 7
********************************************************
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
> The router was connected via ADSL2+ for a day prior to FTTC being enabled, hence the difference between the Total count and the 'Since Link' count
-
colsey85
- Posts: 12
- Joined: Mon Apr 13, 2015 6:51 pm
Re: 8800nl with way too many error seconds.
Thanks frogfoot, maybe mine is normal then, I have looked around a few other places and seen people with similar numbers to mine and people saying its with the normal range. It also seems to have quietened down a bit today since my last post 9 hours ago it has only risen by 100 ES and 2 SES
-
colsey85
- Posts: 12
- Joined: Mon Apr 13, 2015 6:51 pm
Re: 8800nl with way too many error seconds.
Just when I thought it was calming down it has had 1000 ES today and it hasnt even been used.
-
colsey85
- Posts: 12
- Joined: Mon Apr 13, 2015 6:51 pm
Re: 8800nl with way too many error seconds.
just thinking out loud could it be something to do with power management? it seems to get very few ES while we are using it they all magically appear overnight? Since my earlier post saying about the thousand we had without it being used it has barely gone up at all this evening while its being used.