Billion UK Forum

Hi there...

I recently bought the 7300n and despite my best efforts I can't get it to work with XBL properly. I have set up my ports according to the setting on portforward.com (using the settings for a 7800n, as the site does not list 7300n) http://portforward.com/english/routers/ ... ve_360.htm

And still no joy.

See the attached image of my ports, am I doing this wrong?
Your help would be greatly received!

Have you tried to use the DMZ function?

Set a static IP to your Xbox using the following IP settings - IP address - 192.168.1.201 Subnet Mask - 255.255.255.0 Gateway/Router IP - 192.168.1.254 DNS servers - 8.8.8.8 and Secondary DNS Server - 8.8.4.4

Now go to the routers interface, go to Virtual Server, click on DMZ on the left column and enter your Xbox IP - 192.168.1.201 and click on 'Apply' and then check your NAT level on xbox, (run network test).

I hope this helps.

Side note the ports that need to be opened are UDP - 88,TCP/UDP 3074.

Thank you very much for the info, I'll try those settings! x