Page 1 of 1

Access to internal ip address

Posted: Thu Mar 23, 2017 2:05 pm
by Kevbillion
I think I need to setup for forwarding but I don't know how to on this.
I want to access an internal ip address using a udp port, from the internet. How do I do this?
regards
Kev

Re: Access to internal ip address

Posted: Thu Mar 23, 2017 5:34 pm
by Kevbillion
might begetter to give more info.
I've setup a virtual server, with port 57612 on the external port, used tcp/udp and 57612 on the internal port, with the server ip address the device I want to connect to. When I use port checker on the internet it says the port is closed. What've I done wrong.
Kev

Re: Access to internal ip address

Posted: Mon Apr 03, 2017 10:24 am
by billion_fan
Kevbillion wrote:might begetter to give more info.
I've setup a virtual server, with port 57612 on the external port, used tcp/udp and 57612 on the internal port, with the server ip address the device I want to connect to. When I use port checker on the internet it says the port is closed. What've I done wrong.
Kev
You also need to check the following

1. The Virtual Rule, you have a 'Interface' option, this needs to be set to the correct WAN interface eg PPPoA for ADSL PPPoE for VDSL
2. Check to make sure the gateway address on your server is set correctly.