Billion UK Forum

Hello

I have two wireless networks one for our family and one for the guests at our guest house.

I have client isolation ticked on the guests network.

I have created two groups in the interface grouping as follows:

Our network (default) 192.168.1.100-192.168.1.199 = p4/Ewan,P1,P2,P3 and our WfFi Network

The Guest network (guests) 192.168.2.1-192.168.2.253 = the guests WiFi network

I have ticked groups isolation in interface grouping.

I am using serviio console 1.31 as a media server on a pc connected by wifi to our home network which I believed should be isolated from the guest network yet serviio software is reporting/aware of devices attached to the guest network... (192.168.2.2 etc.)

Am I doing something wrong?

Under LAN >> Ethernet for the 'Group Name' select your guest wifi group name that you created in the 'Interface Grouping' section.

Then tick 'LAN Side Firewall' and click on 'Apply' and test again.

Thanks that seems OK now

Actually I have looked again and it is still not working.

I have two wireless networks one for our family and one for the guests at our guest house.
I have client isolation ticked on the guests network.
I have created two groups in the interface grouping as follows:

Our network (default) 192.168.1.100-192.168.1.199 = p4/Ewan,P1,P2,P3 and our WfFi Network

The Guest network (guests) 192.168.2.1-192.168.2.253 = the guests WiFi network

I have ticked groups isolation in interface grouping.

When I attach a pc to one of the ports on the router it says my pc is connected to the Guest Network even thought all the ports are mapped to our network. Any help please?

Thanks

Am I doing something wrong?

bandbshrewsbury wrote:Actually I have looked again and it is still not working.

I have two wireless networks one for our family and one for the guests at our guest house.
I have client isolation ticked on the guests network.
I have created two groups in the interface grouping as follows:

Our network (default) 192.168.1.100-192.168.1.199 = p4/Ewan,P1,P2,P3 and our WfFi Network

The Guest network (guests) 192.168.2.1-192.168.2.253 = the guests WiFi network

I have ticked groups isolation in interface grouping.

When I attach a pc to one of the ports on the router it says my pc is connected to the Guest Network even thought all the ports are mapped to our network. Any help please?

Thanks

Am I doing something wrong?

Try changing the network name