[22/1/2014] New 2.32d firmware for 7800DX/DXL/VDOX

[admin]

22/1/2014

We are glad to release the 2.32d firmware for the 7800DX series.

Firmware can be download form the link below:

7800DXL: http://www.billion.uk.com/esupport/inde ... d-firmware

7800DX: http://www.billion.uk.com/esupport/inde ... d-firmware

7800VDOX: http://www.billion.uk.com/esupport/inde ... d-firmware

7800x : http://www.billion.uk.com/esupport/inde ... d-firmware




Release note:


BiPAC 7800DX series 2.32d firmware

New Features & Enhancements:

1. VPN: (VPN models only)
1‐1 Added MTU setting on IPSEC configuration.
1‐2 Added exception group for L2TP and PPTP server.

2. 3G
2‐1 Added support for HUAWEI E392/E1552/E5776 dongles.

3. Security
3‐1 Added "Drop" & "Forward" actions of time schedule on time restriction feature.
Note: "Drop" will always drop MAC entries, "Forward" is the reverse and will always forward them.


4. NAT
4‐1 "Edit" action support on port trigger setting.
4‐2 Avoid NAT table full which will cause system be locked up.

5. DNS
5‐1 Added "freedns" to ddns server list.
5‐2 Added keep‐alive mechanism for DDNS.
Note: "Period" refers to the update period and can be set based on Day/Hour/Minute

6. Management
6‐1 Added support for http port changed.
6‐2 Added WAN MAC display for TR069.

7. LAN
7‐1 Added support for VRRP router redundancy protocol.

8. Wireless
8‐1 Added wireless MAC address list on Wireless MAC Filter.


Bug Fixed:

1. Fixed issue whereby fax mail fails when sending large files (VOIP models only).
2. Fixed VOIP issue whereby incoming calls fails when DMZ enabled (VOIP models only).
3. Fixed issue where by block wan ping function will lose efficiency when remote access is enabled.
4. Fixed issue whereby system locks when removing port trigger rules.
5. Fixed issue whereby jumbo frames don’t work on PPPoE connections.
6. Fixed NAT traversal can't work on IPSec (VPN models only).
7. Fixed issue whereby DLNA can't list music by category.
8. Fixed issue whereby bandwidth usage pages don’t show correctly with IE11.
9. Fixed issue whereby print jobs don’t complete when printing large files.

[Steelstar]

Am I wrong or this update didn't fix the pppoA QoS bug? I don't read anything about it in the release notes.

[billion_fan]

Am I wrong or this update didn't fix the pppoA QoS bug? I don't read anything about it in the release notes.

We are still investigating with our engineers, once I get a update I will post it

[BadMelonFarmer]

On iPad, when I click on things such a "Wireless 2.4" or "Mail alert" in configuration. I lose the left hand column with all the status, config, quick start etc and also the part of the page where you would actually put the configuration into.

When I select refresh... It goes back to the main status page.

It's not all menu items on the left that do this, but quite a few.. Wireless ones do it 90% of the time the mail alert has been 100%

Yes I fid a factory resets... Which is why I was trying re-input the config into the mail and wireless options.

[pwatson]

The link for 2.32d for the 7800X is missing above...

It's here

[billion_fan]

On iPad, when I click on things such a "Wireless 2.4" or "Mail alert" in configuration. I lose the left hand column with all the status, config, quick start etc and also the part of the page where you would actually put the configuration into.

When I select refresh... It goes back to the main status page.

It's not all menu items on the left that do this, but quite a few.. Wireless ones do it 90% of the time the mail alert has been 100%

Yes I fid a factory resets... Which is why I was trying re-input the config into the mail and wireless options.

What web browser are you using on your iPad?? Have you tried a different web browser eg google chrome, have you tried to clear your cache, history etc??

Can you confirm the verison of iPad you are using, I want to try and replicate your issue here

[billion_fan]

The link for 2.32d for the 7800X is missing above...

It's here

Added to list above

[BadMelonFarmer]

Seems to be working ok now.

How very strange.... The only thing I changed was to make the changes from my mac ( Latest Safari on Mavericks)

Now if I go back to the settings on my ipad (iOS 7) or iPhone (iOS7) it seems to be ok.

I used Safari , not chrome on the ipad

Very odd

[billion_fan]

Seems to be working ok now.

How very strange.... The only thing I changed was to make the changes from my mac ( Latest Safari on Mavericks)

Now if I go back to the settings on my ipad (iOS 7) or iPhone (iOS7) it seems to be ok.

I used Safari , not chrome on the ipad

Very odd

I know our engineers made changes to the web gui to resolve viewing problems with IE11, as listed within the release notes, if its working fine now, it should be nothing to worry about

[BadMelonFarmer]

I will keep an eye on it and keep trying it to see if I can reproduce it.... If I can I will report back