Billion 8800NL Reported Line Errors

[slostuk]

Ok so I am new, please take it easy on me. I purchased a Billion 8800NL to replace a OR modem and BT HH3.

I setup the pppoe connection ok (should I also delete the default pppoa connection).

When I perform a SpeedTest my download is ~3M lower than it was when running with the OR modem and BT HH3.

I also notice that the xDSL is reporting OH Frame Errors and OCD Errors along with HEC Errors (however I understand that HEC Error are normal).

How many OH Frame Errors and OCD Errors would be typical over 10 hours of very light (idle) usage.

Many Thanks

[billion_fan]

Ok so I am new, please take it easy on me. I purchased a Billion 8800NL to replace a OR modem and BT HH3.

I setup the pppoe connection ok (should I also delete the default pppoa connection).

When I perform a SpeedTest my download is ~3M lower than it was when running with the OR modem and BT HH3.

I also notice that the xDSL is reporting OH Frame Errors and OCD Errors along with HEC Errors (however I understand that HEC Error are normal).

How many OH Frame Errors and OCD Errors would be typical over 10 hours of very light (idle) usage.

Many Thanks

Yes you can delete the PPPOA interface if you are using a fibre connection

What firmware version are you running??

Regarding the OH Frame Errors and OCD Errors it is best to check with the ISP, if the number of errors are expectable for your line

Was the speed test run with a wired connection or a wireless connection??

[slostuk]

Firmware Details

Model Name BiPAC 8800NL
Host Name home.gateway
System Up-Time 0D 14H 29M 40S
Date/Time Tue Oct 21 09:22:58 2014
Software Version 2.32d.dh14
DSL PHY and Driver Version A2pv6F039g1.d24m
Wireless Driver Version 6.30.102.7.cpe4.12L08.4

The speedtests were performed using a wired connection

I started a telnet session and ran the adsl info --stats command

The output obtained is below. Is there anything or concern?

> adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25382 Kbps, Downstream rate = 73620 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 73616 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.3 15.1
Attn(dB): 15.8 0.0
Pwr(dBm): 12.5 6.7

VDSL2 framing
Bearer 0
MSGc: 18 26
B: 239 237
M: 1 1
T: 22 42
R: 0 16
S: 0.1038 0.3781
L: 18504 5374
D: 1 1
I: 240 127
N: 240 254

Counters
Bearer 0
OHF: 8758109 3793477
OHFErr: 92 20
RS: 0 341850
RSCorr: 0 87
RSUnCorr: 0 0

Bearer 0
HEC: 349 0
OCD: 1 0
LCD: 1 0
Total Cells: 2131049476 0
Data Cells: 6710279 0
Drop Cells: 0
Bit Errors: 0 0

ES: 72 6
SES: 0 0
UAS: 0 0
AS: 15056

Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 1.71 3.98
OR: 111.70 64.22
AgR: 73728.00 20063.54

Bitswap: 96/96 5/5

Total time = 4 hours 10 min 56 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 10 min 56 sec
FEC: 0 1
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 0
CRC: 2 0
ES: 2 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 4 hours 10 min 56 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 4 hours 10 min 55 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
>

[billion_fan]

Firmware Details

Model Name BiPAC 8800NL
Host Name home.gateway
System Up-Time 0D 14H 29M 40S
Date/Time Tue Oct 21 09:22:58 2014
Software Version 2.32d.dh14
DSL PHY and Driver Version A2pv6F039g1.d24m
Wireless Driver Version 6.30.102.7.cpe4.12L08.4

The speedtests were performed using a wired connection

I started a telnet session and ran the adsl info --stats command

The output obtained is below. Is there anything or concern?

> adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25382 Kbps, Downstream rate = 73620 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 73616 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.3 15.1
Attn(dB): 15.8 0.0
Pwr(dBm): 12.5 6.7

VDSL2 framing
Bearer 0
MSGc: 18 26
B: 239 237
M: 1 1
T: 22 42
R: 0 16
S: 0.1038 0.3781
L: 18504 5374
D: 1 1
I: 240 127
N: 240 254

Counters
Bearer 0
OHF: 8758109 3793477
OHFErr: 92 20
RS: 0 341850
RSCorr: 0 87
RSUnCorr: 0 0

Bearer 0
HEC: 349 0
OCD: 1 0
LCD: 1 0
Total Cells: 2131049476 0
Data Cells: 6710279 0
Drop Cells: 0
Bit Errors: 0 0

ES: 72 6
SES: 0 0
UAS: 0 0
AS: 15056

Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 1.71 3.98
OR: 111.70 64.22
AgR: 73728.00 20063.54

Bitswap: 96/96 5/5

Total time = 4 hours 10 min 56 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 10 min 56 sec
FEC: 0 1
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 0
CRC: 2 0
ES: 2 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 4 hours 10 min 56 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 4 hours 10 min 55 sec
FEC: 0 87
CRC: 92 20
ES: 72 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
>

Try loading the older firmware found here viewtopic.php?f=19&t=3187 (2.32d.dm2) this firmware has the older DMT code.