Billion UK Forum

Hi.

Under the heading "Common Route Settings" my ISP (Unicom) lists the following;
1. Virtual Circuit Identifier – VCI: 38
2. Virtual Path Finder – VPI: 0
3. Encapsulation Mode: VCMUX
4. Authentication Type: CHAP
5. Protocol: PPPoA (RFC 2364:PPP over ATM)
6. Modulation Type: G.DMT or Auto
7. DNS Settings
- Primary DNS: 212.74.112.66
- Secondary DNS: 212.74.112.67

I am not sure where to enter the DNS settings lited at the bottom of this list. Can someone advise me?

Thank you.

You can enter your static DNS settings under 'Advanced Setup >> DNS >> DNS'

On this page select 'Use the following Static DNS IP address' and enter in the 'Primary DNS server' section 212.74.112.66 and in the 'Secondary DNS server' section enter 212.74.112.67

billion_fan wrote:You can enter your static DNS settings under 'Advanced Setup >> DNS >> DNS'

On this page select 'Use the following Static DNS IP address' and enter in the 'Primary DNS server' section 212.74.112.66 and in the 'Secondary DNS server' section enter 212.74.112.67

Great, thanks for your help.