Page 3 of 5
Re: Bipac 7800N 1.06g Firmware
Posted: Sun May 13, 2012 3:01 pm
by Tomken
Need the 1.06fdc back.
Just upgraded to 1.06g and my latency has increased by 11ms.
I'm always dubious about betas and looks like I was right about this one but because of the favourable reviews, succumbed against my better judgement.
Is there a link on the forum for the predcessor to this one ?
Re: Bipac 7800N 1.06g Firmware
Posted: Mon May 14, 2012 8:49 am
by AndyCap
Tomken wrote:Need the 1.06fdc back.
Is there a link on the forum for the predcessor to this one ?
Bipac 7800N Firmware 1.06f.dc1
Re: Bipac 7800N 1.06g Firmware
Posted: Fri Oct 12, 2012 1:51 pm
by sberest
I have just ordered this router
Does it matter which port I plug the RJ45 cable into from the BT Box?
Cheers
Re: Bipac 7800N 1.06g Firmware
Posted: Fri Oct 12, 2012 3:59 pm
by billion_fan
sberest wrote:I have just ordered this router
Does it matter which port I plug the RJ45 cable into from the BT Box?
Cheers
If you are using ADSL then you can use any of the 5 ports, (the EWAN port will only connect to 100mbps)
If you are using a fibre connection then you can only use LAN ports 1-4, as the EWAN will be used to connect to your fibre modem
Re: Bipac 7800N 1.06g Firmware
Posted: Tue Oct 23, 2012 12:56 pm
by sparkister
This fixed the wireless problem i was having but now i connect but get no data through.
Re: Bipac 7800N 1.06g Firmware
Posted: Wed Oct 24, 2012 9:55 am
by billion_fan
sparkister wrote:This fixed the wireless problem i was having but now i connect but get no data through.
Do you mean the firmware has fixed your wireless issue?
Re: Bipac 7800N 1.06g Firmware
Posted: Sun Nov 03, 2013 1:55 pm
by madhatter
Any update on new firmware for this router.
Re: Bipac 7800N 1.06g Firmware
Posted: Mon Nov 04, 2013 10:11 am
by billion_fan
madhatter wrote:Any update on new firmware for this router.
The latest firmware is 1.06h.dt2 found on the below link
viewtopic.php?f=17&t=1486
This firmware resolves the blank the DHCP table and virtual server crash issue.
Re: Bipac 7800N 1.06h Firmware
Posted: Mon Feb 23, 2015 7:09 pm
by gearcam
Hi
Sorry for what may be a stupid question in this forum.
My ISP is Sky I have ordered a 7800N and want to set up to connect straight to Sky as the sky Wi-Fi is crap.
I can see the set up help that looks pretty straight forward.
But what do I put in for username|passwork where do I get these from ?
I do have wireshark V1.12.3 and can get it to run but need to know how to get this info ?
is this the correct firmware for Sky ?
UKBillion7800NV6_1.06h.dt2.afw
Thanks Steve
Re: Bipac 7800N 1.06h Firmware
Posted: Tue Feb 24, 2015 9:49 am
by billion_fan
gearcam wrote:Hi
Sorry for what may be a stupid question in this forum.
My ISP is Sky I have ordered a 7800N and want to set up to connect straight to Sky as the sky Wi-Fi is crap.
I can see the set up help that looks pretty straight forward.
But what do I put in for username|passwork where do I get these from ?
I do have wireshark V1.12.3 and can get it to run but need to know how to get this info ?
is this the correct firmware for Sky ?
UKBillion7800NV6_1.06h.dt2.afw
Thanks Steve
1.06h.dt2 is fine for Sky, you will need to extract your current sky username and password from your current sky equipment, you might have to google this procedure or check the skyuser forums