7800DX wireless problem

Post Reply
sabre999uk
Posts: 38
Joined: Tue Aug 09, 2011 5:31 pm

7800DX wireless problem

Post by sabre999uk »

Hi,
Twice now in the last couple of weeks I've had a problem with the wireless on my 7800DX, I can be happily using it from my laptop then all of a sudden:
1 my wireless icon shows the yellow triangle for local only access
2 any Android devices disconnect from the network and refuse to reconnect reporting the network as disabled.
3 As soon as I log into the 7800dx from my laptop my internet access is back but still the Android devices refuse to reconnect.
4 All wired devices still work fine so logged in from my PC switched off the wireless (I only have 2.4 enabled) waited 20 minutes then re-enabled it, laptop connects, Android devices still show disabled.
5 Last resort restarted the 7800DX from the web interface and immediately things are back to normal and the Android devices have all connected.

First time it happened was 2350 on a Tuesday second time 1010 this morning, before the problem started my internet hadn't dropped for 65 days which is a record for me.
Any Ideas as to what's happening, there was nothing unusual in the logs of the Billion it shows it was responding to requests for ip addresses from the 3 Android devices.
I'm using firmware 2.32d.dm12

Thanks
Steve
Top
billion_fan
Posts: 5398
Joined: Tue Jul 19, 2011 4:30 pm

Re: 7800DX wireless problem

Post by billion_fan »

sabre999uk wrote:Hi,
Twice now in the last couple of weeks I've had a problem with the wireless on my 7800DX, I can be happily using it from my laptop then all of a sudden:
1 my wireless icon shows the yellow triangle for local only access
2 any Android devices disconnect from the network and refuse to reconnect reporting the network as disabled.
3 As soon as I log into the 7800dx from my laptop my internet access is back but still the Android devices refuse to reconnect.
4 All wired devices still work fine so logged in from my PC switched off the wireless (I only have 2.4 enabled) waited 20 minutes then re-enabled it, laptop connects, Android devices still show disabled.
5 Last resort restarted the 7800DX from the web interface and immediately things are back to normal and the Android devices have all connected.

First time it happened was 2350 on a Tuesday second time 1010 this morning, before the problem started my internet hadn't dropped for 65 days which is a record for me.
Any Ideas as to what's happening, there was nothing unusual in the logs of the Billion it shows it was responding to requests for ip addresses from the 3 Android devices.
I'm using firmware 2.32d.dm12

Thanks
Steve
have you set your bandwidth to 20mhz for the 2.4ghz band?
Top
sabre999uk
Posts: 38
Joined: Tue Aug 09, 2011 5:31 pm

Re: 7800DX wireless problem

Post by sabre999uk »

no, bandwidth is set to 20/40mhz for the 2.4ghz band, should I change it? Never had the problem before & the only thing that altered in last 2 weeks is my Android phone updated to Lollipop.

Steve
Top
billion_fan
Posts: 5398
Joined: Tue Jul 19, 2011 4:30 pm

Re: 7800DX wireless problem

Post by billion_fan »

sabre999uk wrote:no, bandwidth is set to 20/40mhz for the 2.4ghz band, should I change it? Never had the problem before & the only thing that altered in last 2 weeks is my Android phone updated to Lollipop.

Steve
Give it try (changing the bandwidth over 20mhz)
Top
sabre999uk
Posts: 38
Joined: Tue Aug 09, 2011 5:31 pm

Re: 7800DX wireless problem

Post by sabre999uk »

OK I'll give it a try and report back in a month, sooner if it happens again.

Steve
Top
billion_fan
Posts: 5398
Joined: Tue Jul 19, 2011 4:30 pm

Re: 7800DX wireless problem

Post by billion_fan »

sabre999uk wrote:OK I'll give it a try and report back in a month, sooner if it happens again.

Steve
No problem mate :D
Top
sabre999uk
Posts: 38
Joined: Tue Aug 09, 2011 5:31 pm

Re: 7800DX wireless problem

Post by sabre999uk »

Further problems today, wireless stopped working then 7800dx rebooted itself - this is the log, I've not seen these entries before
Jan 1 00:00:12 daemon warn kernel: Created Proc FS /procfs/fcache
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v2.2 Oct 17 2014 11:37:23^[[0m
Jan 1 00:00:12 daemon warn kernel: chipId 0x636220B0
Jan 1 00:00:12 daemon warn kernel: Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Oct 17 2014 11:37:18 Registered <241>
Jan 1 00:00:12 daemon warn kernel: Enabling SMISBUS PHYS_FAP_BASE[0] is 0x14001000
Jan 1 00:00:12 daemon warn kernel: FAP Soft Reset Done
Jan 1 00:00:12 daemon warn kernel: 4ke Reset Done
Jan 1 00:00:12 daemon warn kernel: FAP Debug values at 0xac89c810 0xac89c810
Jan 1 00:00:12 daemon warn kernel: Allocated FAP0 GSO Buffers (0xAC8AD898) : 1048576 bytes @ 0xAC900000
Jan 1 00:00:12 daemon warn kernel: Allocated FAP0 TM SDRAM Queue Storage (ac8ad89c) : 341376 bytes @ aca00000
Jan 1 00:00:12 daemon warn kernel: ^[[0;34m[NTC fapProto] fapReset : Reset FAP Protocol layer^[[0m
Jan 1 00:00:12 daemon warn kernel: [FAP0] DSPRAM : stack <0x80004000><1536>, global <0x80004600><3760>, free <2896>, total<8192>
Jan 1 00:00:12 daemon warn kernel: [FAP0] PSM : addr<0xE0010000>, used <24216>, free <8552>, total <32768>
Jan 1 00:00:12 daemon warn kernel: fapDrv_construct: FAP0: pManagedMemory=b1010650. wastage 8 bytes
Jan 1 00:00:12 daemon warn kernel: bcmPktDma_bind: FAP Driver binding successfull
Jan 1 00:00:12 daemon warn kernel: [FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE00045F8
Jan 1 00:00:12 daemon warn kernel: [FAP0] GSO Buffer set to 0xAC900000
Jan 1 00:00:12 daemon warn kernel: [FAP0] FAP BPM Initialized.
Jan 1 00:00:12 daemon warn kernel: [FAP0] FAP TM: ON
Jan 1 00:00:12 daemon warn kernel: bcmxtmcfg: bcmxtmcfg_init entry
Jan 1 00:00:12 daemon warn kernel: adsl: adsl_init entry
Jan 1 00:00:12 daemon warn kernel: Broadcom BCM6362B0 Ethernet Network Device v0.1 Oct 17 2014 11:37:36
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 4800, offset=b1010650 bytes remaining 7000
Jan 1 00:00:12 daemon warn kernel: ETH Init: Ch:0 - 200 tx BDs at 0xb1010650
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: wastage 8 bytes
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b1011910 bytes remaining 2184
Jan 1 00:00:12 daemon warn kernel: ETH Init: Ch:0 - 600 rx BDs at 0xb1011910
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
Jan 1 00:00:12 daemon warn kernel: eth0: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth1: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth2: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth3: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: ^[[0;34m[NTC arl] arlEnable : Enabled ARL binding to FAP^[[0m
Jan 1 00:00:12 daemon warn kernel: Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Oct 17 2014 11:37:16 Registered <245>
Jan 1 00:00:12 daemon warn kernel: --SMP support
Jan 1 00:00:12 daemon warn kernel: wl: dsl_tx_pkt_flush_len=338
Jan 1 00:00:12 daemon warn kernel: wl: high_wmark_tot=12298
Jan 1 00:00:12 daemon debug kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan 1 00:00:12 daemon warn kernel: wl: passivemode=1
Jan 1 00:00:12 daemon warn kernel: wl: napimode=0
Jan 1 00:00:12 daemon warn kernel: wl0: allocskbmode=1 currallocskbsz=512
Jan 1 00:00:12 daemon warn kernel: Neither SPROM nor OTP has valid image
Jan 1 00:00:12 daemon warn kernel: wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
Jan 1 00:00:12 daemon warn kernel: wl:loading /etc/wlan/bcm6362_map.bin
Jan 1 00:00:12 daemon warn kernel: srom rev:8
Jan 1 00:00:12 daemon warn kernel: wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
Jan 1 00:00:12 daemon warn kernel: wl0: Broadcom BCM435f 802.11 Wireless Controller 6.30.102.7.cpe4.12L08.4
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Jan 1 00:00:12 daemon warn kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 1 00:00:12 daemon debug kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 1 00:00:12 daemon warn kernel: wl: passivemode=1
Jan 1 00:00:12 daemon warn kernel: wl: napimode=0
Jan 1 00:00:12 daemon warn kernel: wl1: allocskbmode=1 currallocskbsz=3500
Jan 1 00:00:12 daemon warn kernel: Neither SPROM nor OTP has valid image
Jan 1 00:00:12 daemon warn kernel: wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
Jan 1 00:00:12 daemon warn kernel: wl:loading /etc/wlan/bcm43228_map.bin
Jan 1 00:00:12 daemon warn kernel: srom rev:8
Jan 1 00:00:12 daemon warn kernel: wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
Jan 1 00:00:12 daemon warn kernel: wl1: Broadcom BCMa8dc 802.11 Wireless Controller 6.30.102.7.cpe4.12L08.4
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: wl1 registered
Jan 1 00:00:12 daemon warn kernel: Loading DECT Shim driver
Jan 1 00:00:12 daemon warn kernel: Initialize DECT Shim layer....
Jan 1 00:00:12 daemon warn kernel: p8021ag: p8021ag_init entry
Jan 1 00:00:12 daemon info kernel: Broadcom 802.1Q VLAN Interface, v0.1
Jan 1 00:00:12 daemon warn kernel: usb r:0
Jan 1 00:00:12 daemon err kernel: hub 1-0:1.0: over-current change on port 1
Jan 1 00:00:12 daemon err kernel: hub 1-0:1.0: over-current change on port 1
Jan 1 00:00:12 daemon warn kernel: DDR Self Refresh pwrsaving is enabled
Jan 1 00:00:12 daemon warn kernel: BcmPwrMngtEnableAvs: AVS_START, 0x8a4a3b28
Jan 1 00:00:12 daemon err syslog: dhcpd:udhcp server (v0.9.6) started
Jan 1 00:00:12 daemon info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:13 daemon info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:13 daemon warn kernel: Netfilter messages via NETLINK v0.30.
Jan 1 00:00:14 daemon info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:18 daemon info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:18 daemon info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 00:00:19 daemon info kernel: device eth1 entered promiscuous mode
Jan 1 00:00:19 daemon info kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 1 00:00:20 daemon info kernel: device eth2 entered promiscuous mode
Jan 1 00:00:20 daemon info kernel: ADDRCONF(NETDEV_UP): eth2: link is not ready
Jan 1 00:00:21 daemon info kernel: device eth3 entered promiscuous mode
Jan 1 00:00:21 daemon info kernel: ADDRCONF(NETDEV_UP): eth3: link is not ready
Jan 1 00:00:22 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:23 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:23 daemon warn kernel: *** dslThread dslPid=1510
Jan 1 00:00:23 daemon warn kernel: BcmAdsl_Initialize=0xC0211E2C, g_pFnNotifyCallback=0xC02478A4
Jan 1 00:00:23 daemon warn kernel: pSdramPHY=0xAFFFFFF8, 0x19141A 0xDEADBEEF
Jan 1 00:00:23 daemon warn kernel: *** XfaceOffset: 0x21F90 => 0x21F90 ***
Jan 1 00:00:24 daemon warn kernel: *** PhySdramSize got adjusted: 0x8D394 => 0xA2E88 ***
Jan 1 00:00:24 daemon warn kernel: AdslCoreSharedMemInit: shareMemSize=381261(381264)
Jan 1 00:00:24 daemon warn kernel: AdslCoreHwReset: pLocSbSta=8a5c0000 bkupThreshold=1600
Jan 1 00:00:24 daemon warn kernel: AdslCoreHwReset: AdslOemDataAddr = 0xAFF82044
Jan 1 00:00:24 daemon warn kernel: ***BcmDiagsMgrRegisterClient: 0 ***
Jan 1 00:00:24 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
Jan 1 00:00:24 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 1600, offset=b1012be0 bytes remaining 584
Jan 1 00:00:24 daemon warn kernel: XTM Init: 200 rx BDs at 0xb1012be0
Jan 1 00:00:24 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 128, offset=b1013220 bytes remaining 456
Jan 1 00:00:24 daemon warn kernel: XTM Init: 16 rx BDs at 0xb1013220
Jan 1 00:00:24 daemon warn kernel: nf_conntrack version 0.5.0 (4080 buckets, 32640 max)
Jan 1 00:00:25 daemon info kernel: message received before monitor task is initialized kerSysSendtoMonitorTask
Jan 1 00:00:26 daemon info kernel: monitor task is initialized pid= 346
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:29 daemon info kernel: device wl0 left promiscuous mode
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:29 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:30 daemon info kernel: device wl0 left promiscuous mode
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:30 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:31 daemon info kernel: device wl0.1 entered promiscuous mode
Jan 1 00:00:31 daemon info kernel: br0: bridge group port 6(wl0.1) entering forwarding state
Jan 1 00:00:33 daemon crit kernel: eth1 (switch port: 3) Link UP 1000 mbps full duplex
Jan 1 00:00:33 daemon info kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jan 1 00:00:33 daemon info kernel: br0: bridge group port 2(eth1) entering forwarding state
Jan 1 00:00:33 daemon crit kernel: eth3 (switch port: 1) Link UP 1000 mbps full duplex
Jan 1 00:00:33 daemon info kernel: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
Jan 1 00:00:33 daemon info kernel: br0: bridge group port 4(eth3) entering forwarding state
Jan 1 00:00:34 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.204, MAC:70:9e:29:b7:e0:0c
Jan 1 00:00:34 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.204, MAC:70:9e:29:b7:e0:0c
Jan 1 00:00:35 daemon info WLAN Schedule: WLAN Schedule Control on wl0 start
Jan 1 00:00:36 user info syslog: WLAN Schedule Control on wl1 exit
Jan 1 00:00:36 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:00:40 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.2, MAC:34:bb:26:12:3b:79
Jan 1 00:00:40 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.2, MAC:34:bb:26:12:3b:79
Jan 1 00:00:41 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:00:47 daemon crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:00:48 daemon crit kernel: Line 0: ADSL link down
Jan 1 00:00:54 daemon warn kernel: wl0: received packet with own address as source address
Jan 1 00:00:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:00:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:00:57 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:01:03 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:03 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:03 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:01:05 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:07 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:13 daemon crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:01:14 daemon crit kernel: Line 0: ADSL link down
Jan 1 00:01:29 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:01:33 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:40 daemon crit kernel: Line 0: ADSL link up, Bearer 0, us=1133, ds=11808
Jan 1 00:01:40 daemon warn kernel: bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
Jan 1 00:01:40 daemon warn kernel: bcmxtmrt: MAC address: 60 03 47 00 e6 71
Jan 1 00:01:40 daemon warn kernel: [DoCreateDeviceReq.3269]: register_netdev
Jan 1 00:01:40 daemon warn kernel: [DoCreateDeviceReq.3271]: register_netdev done
Jan 1 00:01:40 daemon warn kernel: [FAP0] xtmCreateDevice : devId 0, encapType 1, headerLen 0
Jan 1 00:01:40 daemon warn kernel: bcmxtmrt: DSD(8a5a9cbc) - 128
Jan 1 00:01:40 daemon warn kernel: XTM Init: 400 tx BDs at 0xaa744000
Jan 1 00:01:40 daemon warn kernel: bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=1133000, DS=11808000
Jan 1 00:01:40 daemon warn kernel: [FAP0] xtmLinkUp : devId 0, matchId 0
Jan 1 00:01:41 daemon notice syslog: pppd:cms logging initialized.
Jan 1 00:01:41 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm
Jan 1 00:01:41 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm - SUCCESS
Jan 1 00:01:41 daemon notice syslog: pppd 2.4.1 started by admin, uid 0
Jan 1 00:01:41 daemon notice syslog: PPP: Start to connect ...
Jan 1 00:01:41 daemon warn kernel: netdev path : pppoa0 -> atm0
Jan 1 00:01:41 daemon notice syslog: pppd:Using interface pppoa0
Jan 1 00:01:41 daemon notice syslog: pppd:Connect: pppoa0 <-->
Jan 1 00:01:41 daemon err syslog: pppd:Couldn't increase MTU to 1500
Jan 1 00:01:47 daemon crit syslog: PPP LCP UP.
Jan 1 00:01:48 daemon err syslog: pppd:Couldn't increase MTU to 1500
Jan 1 00:01:48 daemon crit syslog: PPP LCP UP.
Jan 1 00:01:51 daemon notice syslog: pppd:local IP address (Redacted)
Jan 1 00:01:51 daemon notice syslog: pppd:remote IP address 195.166.130.153
Jan 1 00:01:51 daemon notice syslog: pppd:primary DNS address 212.159.6.9
Jan 1 00:01:51 daemon notice syslog: pppd:secondary DNS address 212.159.6.10
Jan 1 00:01:51 daemon crit syslog: Received valid IP address from server. Connection UP.
Jan 1 00:01:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.5, MAC:68:ae:20:74:67:ab
Jan 1 00:01:58 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.5, MAC:68:ae:20:74:67:ab
Jan 1 00:01:58 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache flushing the flows^[[0m
Top
billion_fan
Posts: 5398
Joined: Tue Jul 19, 2011 4:30 pm

Re: 7800DX wireless problem

Post by billion_fan »

sabre999uk wrote:Further problems today, wireless stopped working then 7800dx rebooted itself - this is the log, I've not seen these entries before
Jan 1 00:00:12 daemon warn kernel: Created Proc FS /procfs/fcache
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
Jan 1 00:00:12 daemon warn kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v2.2 Oct 17 2014 11:37:23^[[0m
Jan 1 00:00:12 daemon warn kernel: chipId 0x636220B0
Jan 1 00:00:12 daemon warn kernel: Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Oct 17 2014 11:37:18 Registered <241>
Jan 1 00:00:12 daemon warn kernel: Enabling SMISBUS PHYS_FAP_BASE[0] is 0x14001000
Jan 1 00:00:12 daemon warn kernel: FAP Soft Reset Done
Jan 1 00:00:12 daemon warn kernel: 4ke Reset Done
Jan 1 00:00:12 daemon warn kernel: FAP Debug values at 0xac89c810 0xac89c810
Jan 1 00:00:12 daemon warn kernel: Allocated FAP0 GSO Buffers (0xAC8AD898) : 1048576 bytes @ 0xAC900000
Jan 1 00:00:12 daemon warn kernel: Allocated FAP0 TM SDRAM Queue Storage (ac8ad89c) : 341376 bytes @ aca00000
Jan 1 00:00:12 daemon warn kernel: ^[[0;34m[NTC fapProto] fapReset : Reset FAP Protocol layer^[[0m
Jan 1 00:00:12 daemon warn kernel: [FAP0] DSPRAM : stack <0x80004000><1536>, global <0x80004600><3760>, free <2896>, total<8192>
Jan 1 00:00:12 daemon warn kernel: [FAP0] PSM : addr<0xE0010000>, used <24216>, free <8552>, total <32768>
Jan 1 00:00:12 daemon warn kernel: fapDrv_construct: FAP0: pManagedMemory=b1010650. wastage 8 bytes
Jan 1 00:00:12 daemon warn kernel: bcmPktDma_bind: FAP Driver binding successfull
Jan 1 00:00:12 daemon warn kernel: [FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE00045F8
Jan 1 00:00:12 daemon warn kernel: [FAP0] GSO Buffer set to 0xAC900000
Jan 1 00:00:12 daemon warn kernel: [FAP0] FAP BPM Initialized.
Jan 1 00:00:12 daemon warn kernel: [FAP0] FAP TM: ON
Jan 1 00:00:12 daemon warn kernel: bcmxtmcfg: bcmxtmcfg_init entry
Jan 1 00:00:12 daemon warn kernel: adsl: adsl_init entry
Jan 1 00:00:12 daemon warn kernel: Broadcom BCM6362B0 Ethernet Network Device v0.1 Oct 17 2014 11:37:36
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 4800, offset=b1010650 bytes remaining 7000
Jan 1 00:00:12 daemon warn kernel: ETH Init: Ch:0 - 200 tx BDs at 0xb1010650
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: wastage 8 bytes
Jan 1 00:00:12 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b1011910 bytes remaining 2184
Jan 1 00:00:12 daemon warn kernel: ETH Init: Ch:0 - 600 rx BDs at 0xb1011910
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
Jan 1 00:00:12 daemon warn kernel: eth0: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth1: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth2: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: eth3: MAC Address: 60:03:47:00:E6:6E
Jan 1 00:00:12 daemon warn kernel: ^[[0;34m[NTC arl] arlEnable : Enabled ARL binding to FAP^[[0m
Jan 1 00:00:12 daemon warn kernel: Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Oct 17 2014 11:37:16 Registered <245>
Jan 1 00:00:12 daemon warn kernel: --SMP support
Jan 1 00:00:12 daemon warn kernel: wl: dsl_tx_pkt_flush_len=338
Jan 1 00:00:12 daemon warn kernel: wl: high_wmark_tot=12298
Jan 1 00:00:12 daemon debug kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan 1 00:00:12 daemon warn kernel: wl: passivemode=1
Jan 1 00:00:12 daemon warn kernel: wl: napimode=0
Jan 1 00:00:12 daemon warn kernel: wl0: allocskbmode=1 currallocskbsz=512
Jan 1 00:00:12 daemon warn kernel: Neither SPROM nor OTP has valid image
Jan 1 00:00:12 daemon warn kernel: wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
Jan 1 00:00:12 daemon warn kernel: wl:loading /etc/wlan/bcm6362_map.bin
Jan 1 00:00:12 daemon warn kernel: srom rev:8
Jan 1 00:00:12 daemon warn kernel: wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
Jan 1 00:00:12 daemon warn kernel: wl0: Broadcom BCM435f 802.11 Wireless Controller 6.30.102.7.cpe4.12L08.4
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Jan 1 00:00:12 daemon warn kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 1 00:00:12 daemon debug kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 1 00:00:12 daemon warn kernel: wl: passivemode=1
Jan 1 00:00:12 daemon warn kernel: wl: napimode=0
Jan 1 00:00:12 daemon warn kernel: wl1: allocskbmode=1 currallocskbsz=3500
Jan 1 00:00:12 daemon warn kernel: Neither SPROM nor OTP has valid image
Jan 1 00:00:12 daemon warn kernel: wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
Jan 1 00:00:12 daemon warn kernel: wl:loading /etc/wlan/bcm43228_map.bin
Jan 1 00:00:12 daemon warn kernel: srom rev:8
Jan 1 00:00:12 daemon warn kernel: wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
Jan 1 00:00:12 daemon warn kernel: wl1: Broadcom BCMa8dc 802.11 Wireless Controller 6.30.102.7.cpe4.12L08.4
Jan 1 00:00:12 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: wl1 registered
Jan 1 00:00:12 daemon warn kernel: Loading DECT Shim driver
Jan 1 00:00:12 daemon warn kernel: Initialize DECT Shim layer....
Jan 1 00:00:12 daemon warn kernel: p8021ag: p8021ag_init entry
Jan 1 00:00:12 daemon info kernel: Broadcom 802.1Q VLAN Interface, v0.1
Jan 1 00:00:12 daemon warn kernel: usb r:0
Jan 1 00:00:12 daemon err kernel: hub 1-0:1.0: over-current change on port 1
Jan 1 00:00:12 daemon err kernel: hub 1-0:1.0: over-current change on port 1
Jan 1 00:00:12 daemon warn kernel: DDR Self Refresh pwrsaving is enabled
Jan 1 00:00:12 daemon warn kernel: BcmPwrMngtEnableAvs: AVS_START, 0x8a4a3b28
Jan 1 00:00:12 daemon err syslog: dhcpd:udhcp server (v0.9.6) started
Jan 1 00:00:12 daemon info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:13 daemon info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:13 daemon warn kernel: Netfilter messages via NETLINK v0.30.
Jan 1 00:00:14 daemon info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:18 daemon info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:18 daemon info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 00:00:19 daemon info kernel: device eth1 entered promiscuous mode
Jan 1 00:00:19 daemon info kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 1 00:00:20 daemon info kernel: device eth2 entered promiscuous mode
Jan 1 00:00:20 daemon info kernel: ADDRCONF(NETDEV_UP): eth2: link is not ready
Jan 1 00:00:21 daemon info kernel: device eth3 entered promiscuous mode
Jan 1 00:00:21 daemon info kernel: ADDRCONF(NETDEV_UP): eth3: link is not ready
Jan 1 00:00:22 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:23 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:23 daemon warn kernel: *** dslThread dslPid=1510
Jan 1 00:00:23 daemon warn kernel: BcmAdsl_Initialize=0xC0211E2C, g_pFnNotifyCallback=0xC02478A4
Jan 1 00:00:23 daemon warn kernel: pSdramPHY=0xAFFFFFF8, 0x19141A 0xDEADBEEF
Jan 1 00:00:23 daemon warn kernel: *** XfaceOffset: 0x21F90 => 0x21F90 ***
Jan 1 00:00:24 daemon warn kernel: *** PhySdramSize got adjusted: 0x8D394 => 0xA2E88 ***
Jan 1 00:00:24 daemon warn kernel: AdslCoreSharedMemInit: shareMemSize=381261(381264)
Jan 1 00:00:24 daemon warn kernel: AdslCoreHwReset: pLocSbSta=8a5c0000 bkupThreshold=1600
Jan 1 00:00:24 daemon warn kernel: AdslCoreHwReset: AdslOemDataAddr = 0xAFF82044
Jan 1 00:00:24 daemon warn kernel: ***BcmDiagsMgrRegisterClient: 0 ***
Jan 1 00:00:24 daemon warn kernel: dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
Jan 1 00:00:24 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 1600, offset=b1012be0 bytes remaining 584
Jan 1 00:00:24 daemon warn kernel: XTM Init: 200 rx BDs at 0xb1012be0
Jan 1 00:00:24 daemon warn kernel: fapDrv_psmAlloc: fapIdx=0, size: 128, offset=b1013220 bytes remaining 456
Jan 1 00:00:24 daemon warn kernel: XTM Init: 16 rx BDs at 0xb1013220
Jan 1 00:00:24 daemon warn kernel: nf_conntrack version 0.5.0 (4080 buckets, 32640 max)
Jan 1 00:00:25 daemon info kernel: message received before monitor task is initialized kerSysSendtoMonitorTask
Jan 1 00:00:26 daemon info kernel: monitor task is initialized pid= 346
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:29 daemon info kernel: device wl0 left promiscuous mode
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:29 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:29 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:30 daemon info kernel: device wl0 left promiscuous mode
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering disabled state
Jan 1 00:00:30 daemon info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:30 daemon info kernel: br0: bridge group port 5(wl0) entering forwarding state
Jan 1 00:00:31 daemon info kernel: device wl0.1 entered promiscuous mode
Jan 1 00:00:31 daemon info kernel: br0: bridge group port 6(wl0.1) entering forwarding state
Jan 1 00:00:33 daemon crit kernel: eth1 (switch port: 3) Link UP 1000 mbps full duplex
Jan 1 00:00:33 daemon info kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jan 1 00:00:33 daemon info kernel: br0: bridge group port 2(eth1) entering forwarding state
Jan 1 00:00:33 daemon crit kernel: eth3 (switch port: 1) Link UP 1000 mbps full duplex
Jan 1 00:00:33 daemon info kernel: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
Jan 1 00:00:33 daemon info kernel: br0: bridge group port 4(eth3) entering forwarding state
Jan 1 00:00:34 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.204, MAC:70:9e:29:b7:e0:0c
Jan 1 00:00:34 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.204, MAC:70:9e:29:b7:e0:0c
Jan 1 00:00:35 daemon info WLAN Schedule: WLAN Schedule Control on wl0 start
Jan 1 00:00:36 user info syslog: WLAN Schedule Control on wl1 exit
Jan 1 00:00:36 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:00:40 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.2, MAC:34:bb:26:12:3b:79
Jan 1 00:00:40 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.2, MAC:34:bb:26:12:3b:79
Jan 1 00:00:41 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:00:47 daemon crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:00:48 daemon crit kernel: Line 0: ADSL link down
Jan 1 00:00:54 daemon warn kernel: wl0: received packet with own address as source address
Jan 1 00:00:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:00:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:00:57 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.3, MAC:8c:2d:aa:6c:2a:08
Jan 1 00:01:03 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:03 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:03 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:01:05 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.4, MAC:64:76:ba:82:32:12
Jan 1 00:01:07 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:13 daemon crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:01:14 daemon crit kernel: Line 0: ADSL link down
Jan 1 00:01:29 daemon crit kernel: Line 0: ADSL G.992 started
Jan 1 00:01:33 daemon crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:40 daemon crit kernel: Line 0: ADSL link up, Bearer 0, us=1133, ds=11808
Jan 1 00:01:40 daemon warn kernel: bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
Jan 1 00:01:40 daemon warn kernel: bcmxtmrt: MAC address: 60 03 47 00 e6 71
Jan 1 00:01:40 daemon warn kernel: [DoCreateDeviceReq.3269]: register_netdev
Jan 1 00:01:40 daemon warn kernel: [DoCreateDeviceReq.3271]: register_netdev done
Jan 1 00:01:40 daemon warn kernel: [FAP0] xtmCreateDevice : devId 0, encapType 1, headerLen 0
Jan 1 00:01:40 daemon warn kernel: bcmxtmrt: DSD(8a5a9cbc) - 128
Jan 1 00:01:40 daemon warn kernel: XTM Init: 400 tx BDs at 0xaa744000
Jan 1 00:01:40 daemon warn kernel: bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=1133000, DS=11808000
Jan 1 00:01:40 daemon warn kernel: [FAP0] xtmLinkUp : devId 0, matchId 0
Jan 1 00:01:41 daemon notice syslog: pppd:cms logging initialized.
Jan 1 00:01:41 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm
Jan 1 00:01:41 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm - SUCCESS
Jan 1 00:01:41 daemon notice syslog: pppd 2.4.1 started by admin, uid 0
Jan 1 00:01:41 daemon notice syslog: PPP: Start to connect ...
Jan 1 00:01:41 daemon warn kernel: netdev path : pppoa0 -> atm0
Jan 1 00:01:41 daemon notice syslog: pppd:Using interface pppoa0
Jan 1 00:01:41 daemon notice syslog: pppd:Connect: pppoa0 <-->
Jan 1 00:01:41 daemon err syslog: pppd:Couldn't increase MTU to 1500
Jan 1 00:01:47 daemon crit syslog: PPP LCP UP.
Jan 1 00:01:48 daemon err syslog: pppd:Couldn't increase MTU to 1500
Jan 1 00:01:48 daemon crit syslog: PPP LCP UP.
Jan 1 00:01:51 daemon notice syslog: pppd:local IP address (Redacted)
Jan 1 00:01:51 daemon notice syslog: pppd:remote IP address 195.166.130.153
Jan 1 00:01:51 daemon notice syslog: pppd:primary DNS address 212.159.6.9
Jan 1 00:01:51 daemon notice syslog: pppd:secondary DNS address 212.159.6.10
Jan 1 00:01:51 daemon crit syslog: Received valid IP address from server. Connection UP.
Jan 1 00:01:56 daemon err syslog: dhcpd:sending OFFER to IP:192.168.1.5, MAC:68:ae:20:74:67:ab
Jan 1 00:01:58 daemon err syslog: dhcpd:sending ACK to IP:192.168.1.5, MAC:68:ae:20:74:67:ab
Jan 1 00:01:58 daemon warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache flushing the flows^[[0m

Have you upgraded to firmware 2.32e yet found here

viewtopic.php?f=18&t=3897
Top
sabre999uk
Posts: 38
Joined: Tue Aug 09, 2011 5:31 pm

Re: 7800DX wireless problem

Post by sabre999uk »

Not yet, I'll give it a go.

Steve
Top
Post Reply

Return to “7800NXL/ DXL /DX / VDOX”