NAT for multiple targets
Posted: Tue Jul 07, 2015 10:28 pm
Ok here is my setup:
Private IP Public IP Port needed
192.168.1.2 80.229.50.4 443
192.168.0.3 80.229.50.5 443
On the 7800DXL router I can setup both as ONE TO ONE NAT but this exposes all ports to the internet.
If I choose virtual servers then it errors when trying to add a second target with the same port number.
I obviously don't want to make this a DMZ unit, and I really don't want to frig about with port triggering having multiple ports redirecting on a single IP address.
Whats the solution please?
Private IP Public IP Port needed
192.168.1.2 80.229.50.4 443
192.168.0.3 80.229.50.5 443
On the 7800DXL router I can setup both as ONE TO ONE NAT but this exposes all ports to the internet.
If I choose virtual servers then it errors when trying to add a second target with the same port number.
I obviously don't want to make this a DMZ unit, and I really don't want to frig about with port triggering having multiple ports redirecting on a single IP address.
Whats the solution please?