Billion UK Forum

Hi guys i need an help.

I want to use my qos in order to give totally priority to one pc of my lan (for low ping gaming purpose) instead of all the others.
So i've done theese 4 rules:

pc 4 WAN to LAN 192.168.1.2 ------------------ Any Any Any Any EF Set DSCP Marking
all 4 WAN to LAN 192.168.1.3 ~ 192.168.1.20 Any Any Any Any CS1 Set DSCP Marking
pc 4 LAN to WAN 192.168.1.2 ------------------- Any Any Any Any EF Set DSCP Marking
all2 4 LAN to WAN 192.168.1.3 ~ 192.168.1.20 Any Any Any Any CS1 Set DSCP Marking

but under a stress test, seems all the pcs have the same priority so the pc with EF priority is still doing an high ping when the others are downloading... i've done a mistake or the firmware is bugged??

Thanks for the help.

Try creating the same two rules as shown on the attached screen shot