iPhone not connecting to 2.4Ghz only now (5Ghz works fine)

[stevebez]

So even if I enter the right passphrase the system says its incorrect - yet on iPad works just fine.

Anything in settings I can toy with in wifi security settings to get this working more reliably?

I have bipac 7800 upstairs running as standalone access point mode and seems to work just fine by comparison.

Really odd.

[billion_fan]

So even if I enter the right passphrase the system says its incorrect - yet on iPad works just fine.

Anything in settings I can toy with in wifi security settings to get this working more reliably?

I have bipac 7800 upstairs running as standalone access point mode and seems to work just fine by comparison.

Really odd.

Try changing the SSID and see if you can re-connect. (security should be the standard WPA2 PSK AES

[stevebez]

iPhone connects fine to 5ghz but nothing connects to the 2.ghz ..

my security settings

WPS Setup
WPS Disable (Current: Disable)
Manual Setup AP
Select SSID Chartside
Network Authentication WPA2 -PSK
Protected Management Frames Capable
WPA/WAPI passphrase ••••••••
WPA Group Rekey Interval 3600 [0-2147483647]
WPA/WAPI Encryption AES

My ssid settings
Parameters
Band 2.4GHz
Channel Auto Current: 1 (interference: acceptable)
Auto Channel Timer 1440 minutes
802.11n/EWC Disabled
Turbo QAM Disable
RTS Threshold 2347 [0-2347]
DTIM Interval 1 [1-255]
Beacon Interval 100 [1-65535]
Global Max Clients 16 [1-128]
54g™ Mode 802.11b Only
54g™ Protection Auto
Afterburner Technology Disable (Disable WMM for Selection)
Preamble Type long
WMM(Wi-Fi Multimedia) Enable

Please help!!

[stevebez]

Try as I may I keep getting Incorrect password for "Chartside"

Nothing connects to this ... Imac, Ipad or Iphone

Its almost like the passcode has got corrupt somehow

[stevebez]

Ive reinstalled firmware and rebooted to factory settings

Ive unfortunately updated settings with saved settings before I could test the factory wifi config for 2.4ghz.

But I am back to where I was before

Firm ware is d46

[stevebez]

Changed firmware to d48 - no difference.

Turned off wifi security - devices still can not connect to the network.

[billion_fan]

Changed firmware to d48 - no difference.

Turned off wifi security - devices still can not connect to the network.

Try changing the SSID to one that has not been used before (attached is a guide on how to do that) maybe try Chartside1

[billion_fan]

Changed firmware to d48 - no difference.

Turned off wifi security - devices still can not connect to the network.

Try changing the SSID to one that has not been used before (attached is a guide on how to do that) maybe try Chartside1

I also assume you don't have mac filtering enabled for the 2.4ghz band?

[stevebez]

Ive renamed the SSID and rebooted and that seemed to do the trick!

[stevebez]

This is still not working sadly on the 2.4 Ghz band ... if I turn off encryption it connects fine but when encryption is on my iOS devices wont connect and keeps saying incorrect passphrase...

Any thoughts on encryption settings?