SNMP server query
Posted: Thu Jul 06, 2023 3:26 pm
Hi billion_fan
I'm running firmware 2.52.d51t2 on an 8900AX2400
My 8900 is set up with ptm0.1 as the normal WAN interface but I've recently added an eth5.1 interface to experiment with using a third-party modem. Both interfaces are enabled with the intent the 8900 will use the eth5.1 interface when the VDSL input is disconnected and the ptm0.1 interface when the VDSL input is reconnected. This works fine except for the SNMP server.
With the 8900 set up as above, the SNMP server provides data to an agent when the eth5.1 interface is active but if the VDSL signal is connected, the SNMP data is only provided if the eth5.1 interface is removed from the WAN set up.
This is only a minor inconvenience but I'd appreciate it if a remedy (providing SNMP data without having to remove the eth5.1 WAN interface definition) could be added to some future firmware update.
Cheers, Mike
I'm running firmware 2.52.d51t2 on an 8900AX2400
My 8900 is set up with ptm0.1 as the normal WAN interface but I've recently added an eth5.1 interface to experiment with using a third-party modem. Both interfaces are enabled with the intent the 8900 will use the eth5.1 interface when the VDSL input is disconnected and the ptm0.1 interface when the VDSL input is reconnected. This works fine except for the SNMP server.
With the 8900 set up as above, the SNMP server provides data to an agent when the eth5.1 interface is active but if the VDSL signal is connected, the SNMP data is only provided if the eth5.1 interface is removed from the WAN set up.
This is only a minor inconvenience but I'd appreciate it if a remedy (providing SNMP data without having to remove the eth5.1 WAN interface definition) could be added to some future firmware update.
Cheers, Mike