Hi,
On a Billion 7800DX does anyone know what settings I need in System>Mail Alert to send a email when WAN IP changes using my gmail account? When I try sending a test email, I get:
Sender's E-mail : (my gmail address)
email: FATAL: Smtp error: 334 UGFzc3dvcmQ6
534-5.7.14
534-5.7.14 9jjeMail: FATAL: Send Fail
Also is there a guide anywhere to setting up a IPSEC Lan-to-Lan VPN using 2 Billion 7800DX with 2.32e firmware please.
Thanks in advance.
Steve
Edit: If I turn on 'Allow less secure apps' in my account settings in Gmail it works fine but I don't really want to leave it set like that.
2.32e Help with email sending on WAN IP change
-
- Posts: 38
- Joined: Tue Aug 09, 2011 5:31 pm
-
- Posts: 5398
- Joined: Tue Jul 19, 2011 4:30 pm
Re: 2.32e Help with email sending on WAN IP change
Have a look at the following thread (its for the 8800 series but the setup is the same and users are using gmail)sabre999uk wrote:Hi,
On a Billion 7800DX does anyone know what settings I need in System>Mail Alert to send a email when WAN IP changes using my gmail account? When I try sending a test email, I get:
Sender's E-mail : (my gmail address)
email: FATAL: Smtp error: 334 UGFzc3dvcmQ6
534-5.7.14
534-5.7.14 9jjeMail: FATAL: Send Fail
Also is there a guide anywhere to setting up a IPSEC Lan-to-Lan VPN using 2 Billion 7800DX with 2.32e firmware please.
Thanks in advance.
Steve
viewtopic.php?f=19&t=4012
-
- Posts: 38
- Joined: Tue Aug 09, 2011 5:31 pm
Re: 2.32e Help with email sending on WAN IP change
Hi,
I did look at that thread before posting, I have the following settings:
Wan Port - DSL
SMTP server smtp.gmail.com
Username (my gmail username)
Password (my gmail password)
Sender's email: (redacted) Note: As this is the address the test is sent to should it be recipient email?
SSL/TLS: Enabled
Port: 587
Failover/Fallback email: blank
WAN IP Change alert email: (redacted)
3G/LTE useage allowance: blank
Sim Lost email: blank
Works fine if I log into gmail and turn on 'Allow less secure apps' in 'My Account' but gives the message I posted and fails with it turned off, as I'd rather have it switched off where am I going wrong?
Thanks
Steve
I did look at that thread before posting, I have the following settings:
Wan Port - DSL
SMTP server smtp.gmail.com
Username (my gmail username)
Password (my gmail password)
Sender's email: (redacted) Note: As this is the address the test is sent to should it be recipient email?
SSL/TLS: Enabled
Port: 587
Failover/Fallback email: blank
WAN IP Change alert email: (redacted)
3G/LTE useage allowance: blank
Sim Lost email: blank
Works fine if I log into gmail and turn on 'Allow less secure apps' in 'My Account' but gives the message I posted and fails with it turned off, as I'd rather have it switched off where am I going wrong?
Thanks
Steve
-
- Posts: 5398
- Joined: Tue Jul 19, 2011 4:30 pm
Re: 2.32e Help with email sending on WAN IP change
Its something to do with google security, I would setup a another gmail account and use that for mail alert only with ''Allow less secure apps' turned on. (the only option I'm afraid)sabre999uk wrote:Hi,
I did look at that thread before posting, I have the following settings:
Wan Port - DSL
SMTP server smtp.gmail.com
Username (my gmail username)
Password (my gmail password)
Sender's email: (redacted) Note: As this is the address the test is sent to should it be recipient email?
SSL/TLS: Enabled
Port: 587
Failover/Fallback email: blank
WAN IP Change alert email: (redacted)
3G/LTE useage allowance: blank
Sim Lost email: blank
Works fine if I log into gmail and turn on 'Allow less secure apps' in 'My Account' but gives the message I posted and fails with it turned off, as I'd rather have it switched off where am I going wrong?
Thanks
Steve
-
- Posts: 38
- Joined: Tue Aug 09, 2011 5:31 pm
Re: 2.32e Help with email sending on WAN IP change
Hi,
Ok I'll do that, with reference to my query about lan-to-lan vpn I've found a guide on the Billion Australia that appears to provide what I need.
Thanks.
Steve
Ok I'll do that, with reference to my query about lan-to-lan vpn I've found a guide on the Billion Australia that appears to provide what I need.
Thanks.
Steve
-
- Posts: 5398
- Joined: Tue Jul 19, 2011 4:30 pm
Re: 2.32e Help with email sending on WAN IP change
I was waiting for admin (hes busy at the moment) so I can grab some screen captures for you (I need access to his router as he has a tunnel already setup) but not to worrysabre999uk wrote:Hi,
Ok I'll do that, with reference to my query about lan-to-lan vpn I've found a guide on the Billion Australia that appears to provide what I need.
Thanks.
Steve
