Billion UK Forum

Hello all.
I own a 7800DX, version 2.32e, and I have the exact same set up and issue as described here for the 8800: viewtopic.php?t=4097&start=20#p13533

The 7800 is my main ethernet switch, AP and gateway. On one LAN ports there is a Vigor 2820 acting as an AP, remote ethernet switch and DHCP server.

All clients connected to the Vigor (LAN and Wireless) work perfectly fine: see the network, see the 7800, go on to the internet.

All "wireless" clients connected to the 7800, after a while, can just ping the 7800 and go on to the internet. They loose all connectivity to the rest of my home. Of course the same holds true for the "other clients": they cannot access the wireless devices connected to the 7800. This issue apears after a while of operation: a reboot solves the issue.

For the 8800 they made a temporary firmware fix, is there something similar for the 7800?

Garani wrote:Hello all.
I own a 7800DX, version 2.32e, and I have the exact same set up and issue as described here for the 8800: viewtopic.php?t=4097&start=20#p13533

The 7800 is my main ethernet switch, AP and gateway. On one LAN ports there is a Vigor 2820 acting as an AP, remote ethernet switch and DHCP server.

All clients connected to the Vigor (LAN and Wireless) work perfectly fine: see the network, see the 7800, go on to the internet.

All "wireless" clients connected to the 7800, after a while, can just ping the 7800 and go on to the internet. They loose all connectivity to the rest of my home. Of course the same holds true for the "other clients": they cannot access the wireless devices connected to the 7800. This issue apears after a while of operation: a reboot solves the issue.

For the 8800 they made a temporary firmware fix, is there something similar for the 7800?

Requested for the 7800DX

Thanks a lot, very much appreciated!

Is there any update?

Garani wrote:Is there any update?

No update yet, just chased our engineers again

billion_fan wrote:

Garani wrote:Is there any update?

No update yet, just chased our engineers again

Find attached the latest firmware which has dh4 fix included (the fix for wireless clients unable to see wired client incorporated)

With this firmware, you MUST reset back to factory default settings and you MUST manually reconfigure the device again for the change to take effect.

Is there one for the 7800DXL?

7800nUser wrote:Is there one for the 7800DXL?

Requested

Thanks billion_fan

7800nUser wrote:Is there one for the 7800DXL?

Attached

With this firmware, you MUST reset back to factory default settings and you MUST manually reconfigure the device again for the change to take effect.