Page 1 of 1
2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 3:21 pm
by sabre999uk
Hi,
On a Billion 7800DX does anyone know what settings I need in System>Mail Alert to send a email when WAN IP changes using my gmail account? When I try sending a test email, I get:
Sender's E-mail : (my gmail address)
email: FATAL: Smtp error: 334 UGFzc3dvcmQ6
534-5.7.14
534-5.7.14 9jjeMail: FATAL: Send Fail
Also is there a guide anywhere to setting up a IPSEC Lan-to-Lan VPN using 2 Billion 7800DX with 2.32e firmware please.
Thanks in advance.
Steve
Edit: If I turn on 'Allow less secure apps' in my account settings in Gmail it works fine but I don't really want to leave it set like that.
Re: 2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 3:36 pm
by billion_fan
sabre999uk wrote:Hi,
On a Billion 7800DX does anyone know what settings I need in System>Mail Alert to send a email when WAN IP changes using my gmail account? When I try sending a test email, I get:
Sender's E-mail : (my gmail address)
email: FATAL: Smtp error: 334 UGFzc3dvcmQ6
534-5.7.14
534-5.7.14 9jjeMail: FATAL: Send Fail
Also is there a guide anywhere to setting up a IPSEC Lan-to-Lan VPN using 2 Billion 7800DX with 2.32e firmware please.
Thanks in advance.
Steve
Have a look at the following thread (its for the 8800 series but the setup is the same and users are using gmail)
viewtopic.php?f=19&t=4012
Re: 2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 3:59 pm
by sabre999uk
Hi,
I did look at that thread before posting, I have the following settings:
Wan Port - DSL
SMTP server smtp.gmail.com
Username (my gmail username)
Password (my gmail password)
Sender's email: (redacted) Note: As this is the address the test is sent to should it be recipient email?
SSL/TLS: Enabled
Port: 587
Failover/Fallback email: blank
WAN IP Change alert email: (redacted)
3G/LTE useage allowance: blank
Sim Lost email: blank
Works fine if I log into gmail and turn on 'Allow less secure apps' in 'My Account' but gives the message I posted and fails with it turned off, as I'd rather have it switched off where am I going wrong?
Thanks
Steve
Re: 2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 4:07 pm
by billion_fan
sabre999uk wrote:Hi,
I did look at that thread before posting, I have the following settings:
Wan Port - DSL
SMTP server smtp.gmail.com
Username (my gmail username)
Password (my gmail password)
Sender's email: (redacted) Note: As this is the address the test is sent to should it be recipient email?
SSL/TLS: Enabled
Port: 587
Failover/Fallback email: blank
WAN IP Change alert email: (redacted)
3G/LTE useage allowance: blank
Sim Lost email: blank
Works fine if I log into gmail and turn on 'Allow less secure apps' in 'My Account' but gives the message I posted and fails with it turned off, as I'd rather have it switched off where am I going wrong?
Thanks
Steve
Its something to do with google security, I would setup a another gmail account and use that for mail alert only with ''Allow less secure apps' turned on. (the only option I'm afraid)
Re: 2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 4:34 pm
by sabre999uk
Hi,
Ok I'll do that, with reference to my query about lan-to-lan vpn I've found a guide on the Billion Australia that appears to provide what I need.
Thanks.
Steve
Re: 2.32e Help with email sending on WAN IP change
Posted: Wed Oct 28, 2015 4:36 pm
by billion_fan
sabre999uk wrote:Hi,
Ok I'll do that, with reference to my query about lan-to-lan vpn I've found a guide on the Billion Australia that appears to provide what I need.
Thanks.
Steve
I was waiting for
admin (hes busy at the moment) so I can grab some screen captures for you (I need access to his router as he has a tunnel already setup) but not to worry
